Liquiflo logo.jpg
H12-H14 Sealed Closed Coupled
H12-H14 Sealed Closed Coupled

H12-H14 Sealed Closed Coupled

press to zoom
H12-H14 Sealed Long-Coupled Based Mounted
H12-H14 Sealed Long-Coupled Based Mounted

H12-H14 Sealed Long-Coupled Based Mounted

press to zoom
H1-H9 Mag-Drive Close Coupled
H1-H9 Mag-Drive Close Coupled

H1-H9 Mag-Drive Close Coupled

press to zoom
H12-H14 Sealed Closed Coupled
H12-H14 Sealed Closed Coupled

H12-H14 Sealed Closed Coupled

press to zoom
1/6
H12-H14 Mag-Drive Closed Coupled.jpg
Models H1-H9 Sealed
Closed Coupled

REQUEST QUOTE

H1-H9 Mag-Drive Close Coupled.jpg
Models H12-H14 Sealed Closed Coupled

REQUEST QUOTE

H1-H9 Sealed.jpg
Models H1-H9 Mag-Drive
Close-Coupled

 

REQUEST QUOTE

H12-H14 Mag-Drive Closed Coupled.jpg
Models H12-H14 Mag Drive
Closed Coupled

REQUEST QUOTE

H1-H19 Sealed Long Coupled Based Mounted.jpg
Models H1-H9 Sealed
Long-Coupled 
Base Mounted

REQUEST QUOTE

H12-H14 Sealed Long-Coupled Based Mounted.jpg
Models H12-H14 Sealed
Long-Coupled 
Base Mounted

REQUEST QUOTE

Liquiflo's H-Series high-pressure gear pumps are available in Sealed and Mag-Drive versions with flows up to approximately 55 GPM and differential pressures up to 225 PSI*. With similar external dimensions to the 3-Series, the H-Series pumps have larger shafts, bearings and seals. These features allow the H-Series pumps to handle higher pressures and operate longer. 

 

*300 PSI possible for some models

Liquiflo's Centry® Series are Sealed and Magnetically-Coupled (MC) Centrifugal pumps engineered and manufactured for the user with increased needs for equipment reliability. These pumps are specifically designed to handle the lower flow applications that create maintenance problems for standard ANSI pumps operating at less than BEP. The Centry Series pumps can handle flows up to 160 GPM and heads up to 100 ft. They are available in 316 Stainless Steel or Alloy-C constructions, and with threaded or flanged port configurations.

centry 620.jpg
Model 620 Sealed - Legacy Design
Closed Coupled

REQUEST QUOTE

centry 620-MC-1.jpg
Model 620 Mag-Drive

Closed Coupled

REQUEST QUOTE

centry 620-Sealed-New-1.jpg
Model 620 Sealed - New Drive
Close-Coupled

 

REQUEST QUOTE

centry 621622sealed.jpg
Models 621 & 622 Sealed
Closed Coupled

REQUEST QUOTE

centry 621622mc.jpg
Models 621 & 622 Mag-Drive 
Base Mounted

REQUEST QUOTE

Liquiflo's Endura® Pumps are Group I & Group II ANSI-Dimensional Magnetically-Coupled (MC) centrifugal pumps. These pumps were designed to meet the demanding needs of the chemical processing industry and will also handle many challenging pumping applications, such as those which require dry-running, pumping slurries or high-temperature demands. The Endura Series pumps cover flows up to 770 GPM and heads up to 420 ft. They are available in 316 Stainless Steel or Alloy-C* constructions, and with flanged port configurations.

endura_mainphoto.gif

Endura AB-Series

Liquiflo's Endura® AB-Series is our Patented Air-Barrier Centrifugal Pump. The AB (air-barrier) combines the best features of a standard sealed pump with that of a mag-drive pump, while eliminating the drawbacks commonly associated with these designs. This pump can run dry indefinitely and handle solids - making the Endura® AB unlike any other pump in the industry. 

Endura MC-Series

The Endura® MC-Series is our standard line of Group I & II ANSI-Dimensional Magnetically-Coupled Centrifugal Pumps. With seven standard models, these pumps can cover a wide range of applications.